Follow these easy steps to get your Zanussi CZC 16/9 FA Refrigerator up and running in no time.
Ensure that any locks or catches are removed to prevent young children from being trapped inside the appliance. Keep all packaging materials away from children.
Remove all securing tapes. Wash the inside of the appliance with lukewarm water and bicarbonate of soda (5 ml to 0.5 litre of water). Do not use soap or detergent as the smell may linger. Dry thoroughly.
Place the appliance in a dry atmosphere, out of direct sunlight, and away from extreme temperatures. Ensure that the back of the appliance is close to a wall but leaving the required distance for ventilation.
Any electrical work required should be carried out by a qualified electrician. Ensure that the appliance is earthed and that the plug is easily accessible after installation.
After installation, allow the appliance to stand for 2 hours before turning it on. This allows the refrigerant to settle.
Plug in the appliance and switch on at the mains supply. Turn the thermostat control to a midway setting (3-4). The pilot light will illuminate.
Adjust the thermostat control knob to achieve the desired temperature. The intermediate position (3-4) is usually the most suitable.
Adjust the slider control, located at the back wall of the fridge section, to a midway position between 'MIN' and 'MAX'.
Leave the appliance for approximately 4 hours to reach the correct temperature before placing food inside.